Jeep Wrangler Tires

Jeep Wrangler Tire Service near Lexington, KY

If you’re a Jeep Wrangler driver, chances are you love going off-roading on Kentucky trails, and you rely on all the off-roading features Jeep provides to keep you safe. Even if your Wrangler never leaves the pavement, the single most important safety and performance feature on your Jeep is its tires. They are the one contact point between your Jeep and the ground, and control traction, steering, and braking. If you want to learn the best way to maintain your Jeep’s tires, keep reading.

Jeep Wrangler Tire Size

The first step in taking care of your Jeep Wrangler’s tires is knowing the correct tire size. The tire size varies based on the trim of your Wrangler. The trims, and their correct tire sizes, are:

• Rubicon: LT285/70R17
• Sport: 245/75R17
• Sport S: 245/75R17
• Willys: LT255/75R17
• Willys Sport: LT255/7517

The Wrangler 4XE has different trims and sizes, which are as follows:

• High Altitude: 275/55R20
• Rubicon: LT285/70R17
• Sahara: 275/55R20

The Wrangler Unlimited also has different trims and sizes, which are as follows:

• High Altitude: 275/55R20
• Rubicon: LT285/70R17, LT315/70R17
• Rubicon 392: LT285/70R17, LT315/70R17
• Sahara: 255/70R18
• Sahara Altitude: 255/70R18
• Sport: 245/75R17
• Sport Altitude: 255/70R18
• Sport RHD: 255/70R18
• Sport S: 245/75R17
• Willys: LT255/75R17
• Willys Sport: LT255/75R17

You can find the correct tire size for your Jeep in the sidewall of your tire or on the inside frame of the driver side’s door.

How to Read Tire Sizes

Tire size codes reveal important information about your tires. You can read tire sizes by following this guide:
If you’re unfamiliar with how to read tire sizes, follow these steps:

1. Check if there is a letter at the beginning. P will indicate that it is a passenger vehicle tire that meets U.S. Tire and Rim Association standards. LT means it is a light truck tire that meets the U.S. Tire and Rim Association standards.
2. Look at the three-digit number at the beginning of the code. This indicates the tire section width from sidewall to sidewall in millimeters.
3. Read the next 2 digits. This is the aspect ratio, which is the height-to-width measurement. For example, if the size aspect ratio is 60, that means the tire is 60% as high as it is wide.
4. The next part is the construction code. This is indicated by either R or D. R means radial ply construction, and D means diagonal or bias ply construction.
5. The next number is the rim diameter. This is the diameter of the wheel in inches.

If you’re still not sure which tire size to buy, go with tires that have the same TPC Spec (tire performance criteria specification) as the OEM tires. These will function best with the performance of the vehicle, including braking, handling, traction control, and tire pressure monitoring performance. To check this, look at the OEM tire’s sidewall, where the TPC Spec number will be.
A certified service advisor at Dan Cummins Auto Group would be more than happy to do this process for you.

Jeep Wrangler Tire Pressure

You should check your Wrangler’s tire pressure at least once a month. You should also check it any time the Tire Pressure Monitoring System illuminates, which indicates one of the tires is significantly underinflated.
To check your Wrangler’s tire pressure, follow these steps:

1. Find a good quality pocket-type gauge.
2. Check when the tires are cold, meaning the car has not been driven for at least three hours.
3. Take the valve cap off the tire valve stem.
4. Press the tire gauge firmly onto the valve to get a pressure measurement.
   1. IF the cold tire inflation pressure matches the recommended tire pressure (found on the Tire and Loading Information label) no further adjustment is necessary.
   2. If the pressure is low, add air until the recommended pressure is reached.
   3. If the inflation is high, press on the metal stem in the center of the tire valve to release the air.
5. Check the tire pressure again if you adjusted it.
6. Put the valve caps back on to protect the tire from dirt and moisture.

Tire Rotation for Jeep Wrangler
You should rotate your Jeep Wrangler’s tires every 5,000 to 7,000 miles. This is an essential step in achieving uniform wear for all tires. As soon as you notice any unusual wear on you Wrangler’s tires, come in to Dan Cummins Auto Group CDJR for a tire rotation as soon as possible and ask your service technician to check the tire pressure and look for damaged tires or wheels. If the unusual wear continues, you may need a tire alignment.

Jeep Wrangler Tire Rotation Cost

At Dan Cummins Auto Group CDJR, we provide a convenient Service Menu that lists the prices of our most popular services. We estimate a cost of $14.95 for a tire rotation. During a tire rotation, we will check and set the tire pressures and rotate the tires and wheels as recommended.
If you want a more comprehensive service, we also offer an “Every 6,000 Miles” service, where we rotate your tires and change your engine oil and filter for $44.90. This cost may vary depending on your Wrangler’s needs. If you want a specific quote, please contact one of our service advisors at 859-340-1340. This may be a more convenient service, as it bundles two services with similar intervals.

Jeep Wrangler Tire Alignment

You may need a tire alignment if the uneven wear continues after a tire rotation, or if your Wrangler is veering to one side of the road, hear high pitched noises coming from the tirs, or feel steering wheel vibrations.
When you come in for a tire alignment at Dan Cummins Auto Group, your factory-certified service technician will check and adjust the caster, camber, and set tow, check the tire pressure and wear, and inspect the steering and suspension (adjusting when necessary).
At Dan Cummins Auto Group, a two-wheel alignment costs $79.95 and a four-wheel alignment costs $89.95. These prices may vary based on the parts necessary and labor costs. You can view what each package entails on our service menu.

Wheel Balancing on Jeep Wrangler

If you notice uneven and faster tread wear, lessening fuel economy, or vibration in the steering wheel, floor, or seat that gets worse when you drive faster, you may need a wheel balancing service. Wheel balancing corrects the uneven distribution of weight between your four wheels.
When you ask for a tire balancing service in Paris or Georgetown, KY, a tire balancing machine will spin the tire and wheel to measure the imbalance. Then, your expert service technician at Dan Cummins Auto Group will know the correct tire weights to install to correct the issue.
At Dan Cummins Auto Group, we offer a Wheel Balance Service where we check your Wrangler’s tire pressures & adjust them as necessary, balance all four tires, rotate the tires, inspect the tires and wheels for wear or damage, and torque the wheel nuts as recommended. We estimate a cost of $39.95.

Tire Service near Frankfort, KY

If you’re looking for convenient service near Lexington, KY, look no further. Dan Cummins Auto Group CDJR of Lexington or Georgetown, KY offers exceptional customer experience, with comfortable service lounges, free Wi-Fi, and coffee and snack offerings.
What if you cannot afford to pay your service bill at the time of service? At Dan Cummins Auto Group Auto Group, we offer the option to service your vehicle now and pay the cost back over time with service financing. You will most likely qualify if you need it, since our service has over a 90% approval rate. You can apply online, with no hard credit check, and receive a quick response.
If you’re interested in scheduling tire service in Georgetown, click here, or in Paris, click here.